How to Select and Replace Braille Elevator Buttons the Right Way
A rider runs a finger down the elevator panel looking for the third floor and finds a plate with half its dots worn flat. If your panel looks like that, new braille elevator buttons fix it quickly, and your building team can usually handle the swap in one visit. We make these plates every day, so we'll walk you through what the rules ask for, what to order, and how to install new plates so you only do the job once.
What Are Braille Elevator Buttons, Anyway?
The push button itself is hardware. That hardware includes the accessible elevator indicators, the light that comes on when you register a call and goes out when the car reaches your floor, and your elevator contractor repairs or replaces it. The tactile plate next to the button is what a rider reads by touch.
The braille elevator buttons we make are thin acrylic plates that mount on the panel beside each button, so you can replace them without opening the panel. Under the 2010 ADA Standards, raised characters and braille sit immediately to the left of the button they describe. The button has to measure at least 3/4 inch in its smallest dimension, and the raised characters on car controls run between 5/8 inch and 2 inches tall.
Which Braille Elevator Buttons Does Your Panel Need?
Start with an inventory. Count every floor button, then list each function button on its own line. Floor buttons get a number in raised characters and Grade 2 braille. Function buttons get a specific tactile symbol: emergency stop, alarm, door open, door close, phone, and a star for the main entry floor. We also make plates with up and down arrows for panels that use them.
Before you order braille elevator buttons, check the layout against two rules. Floor numbers run in ascending order, and panels with two or more columns read left to right. Emergency controls, including the alarm, sit together at the bottom of the panel. If your layout breaks either rule, call your elevator contractor before you order plates, because the buttons themselves may need to move.
Panel plates cover one part of your elevator signs. Our guide to the braille signs your building needs covers the rest of the property, room by room.
How Do You Know It's Time for New Ones?
Tactile elevator signs wear first where fingers land most often: the lobby star, the door open button, and the busiest floors. Look for braille dots rubbed flat, tape lifting at the corners, missing plates, and floor numbers that no longer match after a renumbering. Check contrast too. One customer's review described an elevator button that blended into the panel so completely that people kept missing it, and a new plate fixed the problem.
If you're replacing the car operating panel, the new panel has to meet current elevator accessibility standards. Order plates at the same time so your ADA elevator signage matches the new hardware from day one.
Can They Match Your Elevator Cab?
Yes. We make three shapes: a 1.25" x 1.84" rectangle, a 1.25" square, and a circle in 1.25", 1.35", or 1.5". For the rectangle, you choose a 1", 1.25", or 1.5" button size so the plate lines up with the hardware already on your panel. Each plate uses a 1/16 inch modified acrylic face, a 1/32 inch raised profile, and clear raster Grade 2 braille.
Finishes come in ten color combinations, from black, white, blue, and red backgrounds to brushed aluminum, bronze, copper, and gold. Pick contrast first and style second. Black copy on brushed bronze reads clearly and still suits a wood paneled cab. If a floor uses a letter, such as P for parking or M for mezzanine, we make custom elevator signs and plates for those too.
Commercial elevator signage extends past the cab. Braille Sign Pros elevator signs, for example, come in standard sizes like 3 x 8 inches and 6 x 9 inches with multiple background colors, so the signs outside the cab can match the plates inside.
What's the Easiest Way to Swap Them Out?
- Photograph the panel and label each button by floor or function before you remove anything.
- Order one plate per button. We sell plates individually, so you can replace two worn plates without buying a full set.
- Peel off the old plates and remove leftover adhesive. Wipe the surface with isopropyl alcohol and let it dry completely.
- Dry fit each plate immediately to the left of its button before you peel the tape backing.
- Press each plate firmly so the double sided tape bonds across its full back.
- Run a finger down the panel from top to bottom to check alignment and spacing.
Some older panels don't leave room on the left. For existing panels without that space, the 2010 ADA Standards let you place markings as close to the control as possible. Surface prep follows the same rules as ADA restroom sign installation, where a clean, dry surface decides how long the tape holds.
Who Notices When You Get Braille Elevator Buttons Right?
The rider who reads by touch notices first. They step in, find the star for the lobby, count up to their floor, and step off without asking anyone for help. Panel plates work alongside hoistway jamb plates and other elevator wayfinding signs, and together they support calm wayfinding from the front entrance to the right office. Replace worn braille elevator buttons with plates that follow the rules and match your cab, and every rider gets the same independent trip.

Comments
Post a Comment